|PCB connector series 830 in SMD & THR|
Our PCB terminal block 830-A-111-SMD with the pitch of 3,5 mm offers strong performance in the smallest space. The position of the entries in parallel to the printed circuit board enables the advantageous application within housings with external connection. Due to the very small space requirement of only 97 mm² (2 pole design) and the white colour it is ideally suited to various applications in the lighting industry.
The front of the terminal is equipped with pushers to be handled with standard screwdrivers for the removal of the parallelly connected conductors.
The easy to use spring system allows beside the use of flexible wires the connection of solid wires with a cross section up to 1 mm² with a Rated Current of 13,5 A.
The advanced design of this high temperature resistant terminal allows the free circulation of hot air in the convection oven during the reflow soldering process.
The standard packaging in Tape-on-Reel makes this terminal very suitable for its automatic pick & place in the production line.
Please find further technical characteristics, photos and technical drawings in the correspondent data sheets.
In addition to the SMD version, we also offer a THR version of this product. The 830-A-111-THR gives the opportunity to continue the use of his proven PCB layout with through holes and to set up with miniaturization.
Samples are available from April.
Thank you for your interest in this WECO product. All further advantages become acquainted by a detailed consultation.
We remain at your disposal for any further information that you may require.